A self-priming multi-stage pump designed for garden irrigation, farm water transfer and domestic water supply applications. Features a weatherproof stainless steel pump body with cast iron ends, fully automatic pressure controller and adjustable start-up pressure from 1.5 to 10 bar.
- Self-priming multi-stage pump with 4 stages
- Maximum flow rate: 7,200L/hr (120L/min)
- Maximum head: 51m
- Rated input power: 1100W, Max input power: 2000W
- duty cycle – designed for continuous operation
- Rust resistant stainless steel pump body with cast iron ends
- Fully automatic on/off controller with pressure gauge
- Adjustable pressure setting: 1.5-10 bar
- IP44 rated motor with thermal protection
- Ceramic and carbon mechanical seals
- Anti-corrosive alloy motor housing
- Brass connectors (1″ inlet/outlet)
- Efficient cooling system with low heat generation
- Leak-proof rubber ring seals
- Casing: Stainless steel
- Motor: Copper wire, Protection class IP44
- Mechanical Seal: Ceramic/Carbon
- Controller voltage: 220/240V, 50/60Hz
- Maximum current: 10A
- Maximum water temperature: 60°C
- Inlet/outlet size: 1″ (25mm)
- Plug & Cord: SAA 250V/10A, approx. 0.6m
- Dimensions: approx. 22 x 15 x 15cm
- Pump weight: approx. 14.5kg
- Controller weight: approx. 1.5kg
- Colour: Black
- 4 Stage Water Pump x1
- Pump Controller x1
Important: This pump is designed for home garden watering, irrigation, rainwater tank transfer and domestic water pressure boosting. It is NOT suitable for heavy-duty industrial, commercial, hydraulic applications, elevator systems or continuous high-load operations. Misuse will void the.
Reviews
There are no reviews yet.